Thousands shipped since 1992 - 800.793.8555
logo

Call: +1 800-793-8555
Intl: +1 719-268-1325
Email:[email protected]

logo
logo

Is-drilling-required

The only time we suggest drilling is on the sheeting to start your location correctly. This is to make starting location of the wall sheets easier and faster. Many erectors will skip this step, this is up to you.
There may be some cutting involved. Some trim will come in 20ft lengths, and will require you to cut as you need to fit an opening or wall. Base angle come is 20ft lengths and will require cutting to exact wall length needed. If you have a field locate walk door and a wall girt below 7’ 6” then you will have to cut the girt to install the walk door where desired.
The only normal cutting comes on the end walls where cross bracing in located. You will need to cut through the girts so the diagonal bracing can pass through and support the end wall columns to stiffen the wall.